Datos técnicos del amplificador
Channels | 4 |
Class | D-Class |
Hi Level Input | Yes |
Low Level Input | Yes |
Digital Input | No |
Power supply voltage / fuse | 11 ÷ 15 VDC / 2 x 25A |
Operating power supply voltage | 6.5 ÷17 VDC |
Idling current | 1.7 A |
Idling current when off | 0.09 mA |
Consumption @ 14.4 VDC, 2Ω, Max Musical Power | 40 A |
Remote OUT | 6.5 ÷ 15 VDC (150 mA) |
Remote IN | 6.5 ÷ 15 VDC (1 mA) |
ART – Automatic Remote Turn on/off from OUTPUT BTL speakers (Selectable) | 1.5 ÷ 7 VDC |
Etapa de amplificación
Distortion – THD @ 100 Hz, 4Ω, 70% Rated Power | 0.08 % |
Bandwidth A | 10 Hz ÷ 35 kHz |
S/N ratio A | 105 dBA |
Damping factor A | 200 |
Input sensitivity Pre-In | 0.2 ÷ 5 VRMS |
Input sensitivity Speaker-In | 0.8 ÷ 20 VRMS |
Total Power RMS | 880 W |
Minimum load impedance | @4Ch: 2Ω @ 3Ch: 2Ω + 2Ω + 4Ω @ 2Ch: 4Ω |
Output Power (RMS) @14.4 VDC, 1% THD | 4Ch 130 W x 4 (4Ω)
4Ch 220 W x 4 (2Ω) 3Ch 120 W x 2 (4Ω) + 480 W x 1 (4Ω) 3Ch 220 W x 2 (2Ω) + 440 W x 1 (4Ω) 2Ch 450 W x 2 (4Ω) |
Adjustable Crossover | Yes |
Especificaciones CEA
Output power @ 4Ω, 1% THD+N, 14.4 V | Output power @ 4Ω, 1% THD+N, 14.4 V: 125 W x 4 Ch |
SN ratio (ref. 1W output) | SN ratio (ref. 1W output): 83 dBA |
Entradas
Input Type | Pre-In / Speaker-In |
Filters Outputs | PRE OUT full range (Input A) |
Filter Pass A | Front Ch Filters – Full Hi-pass: 50 ÷ 3.2k Hz @ 12 dB/Oct. |
Filter Pass B | Front Ch Filters – Full Lo-pass: 50 ÷ 3.2k Hz @ 12 dB/Oct. |
Filter Pass C | Rear Ch Filters – Full Hi-pass: 50 ÷ 3.2k Hz @ 12 dB/Oct. |
Filter Pass D | Rear Ch Filters – Lo-pass: 50 ÷ 3.2k Hz @ 12 dB/Oct |
Channel Mono | A/B Ch MONO IN (on/off) Yes |
Inputs/Outputs Sub CH | (-20 ÷ 6) dB |
Inputs/Outputs Bass Boost | B Ch (0 ÷12) dB |
Otros
Weight | 2.12 kg |